100% Secured Checkout

Keratin Treatment Written Instructions

Instructions for All Keratin Hair Treatments:
we recommend doing the Keratin treatment before coloring especially dyed blond hair . Some highlights reds to blondes variation may experience change of color (example: red may get brighter, blonde may get yellower)

CAREFULLY read all instructions and precautions prior to using the product. In order to discern undesired effects and compatibility issues, please perform a sample test prior to fully applying the product  on your hair. If there are other instructions on the bottle, disregard them and use the instructions below.

 

1. KERATIN HAIR TREATMENT  ( BRAZILIAN) WITH ARGAN OIL ORIGINAL FORMULA

Useful Tip from our Stylists: To help the treatment better penetrate the hair,  After washing your hair and prior to applying the treatment Spray Hydrogen Peroxide (3% can be obtain at any drugstore)  on the hair and avoid from spraying on the face, or apply color developer volume 10 for 15 minutes on your hair, Rinse, Towel dry  and continue with applying the treatment. This step is not necessary for hair that was already treated before.

Wash your hair with clarifying shampoo; this will enable the opening of the cuticles. Rinse well and blow dry. Don’t use conditioner. Wash 2-3 times for better performance. Any oils or conditioner left on the hair may affect the treatment performance and penetration. The Clarifying Shampoo enables PH elevating in order to open the cuticle and optimize the treatment.

Blow-dry and brush your hair with medium heat until it is completely dry. You will notice that it is hard to comb and that is normal (it show you the clarifying shampoo was effective)

Comb and separate hair into 3 sections Left Right and Back.

Start applying the treatment product from the bottom of the Back section , about 1(one) centimeter from the root and stop half way from the hair shaft, then use a fine comb spreading the product evenly to the tips or your hair verify that the hair is evenly saturated and to remove access product.
Note: It is extremely Important that the entire hair is completely covered with the solution and that the solution is evenly distributed throughout the hair before proceeding to the next step. Comb through - using the fine toothed comb - a very little bit should push in front of comb. However the hair should not be over saturated. Excess solution should be combed out of the hair and removed.
Leave solution on the hair for 20 minutes (dont rinse it and continue with the next step)


Blows-dry your hair 100% using medium heat. You may use brush to make it easier for the next step of flat ironing where you need to use small groups of hair , straight detangled hair makes it better and easier to work with. 

Using a flat iron at 435-450°F (it’s about 220-232°C) to straighten the hair in combination with a Heat resistance comb. Starting at the nape, move the iron slowly from the scalp to hairs' ends. Assuring the ends are smooth and straight. Go over the same section several times until there is almost no fumes (it may take 7-12 times depending on your hair type, condition and part of head it is) sealing the keratin into the cuticle. Do not overdo since you can burn the hair use your senses it’s very simple. 


AFTER CARE: Wait overnight and wash your hair with our Sulfate free shampoo and conditioner. That’s it! Simply enjoy your healthy, shiny straight hair. People with very curly hair may not wash hair for 3 days, anyone who desires to stay with treatment for 3 days may do so, there is no harm

MAINTENANCE: Wash hair with: our moisturizing shampoo and conditioner to preserve your healthy and straight hair for longer period. Our Moroccan Argan oil is also a good choice, to preserve your treatment better and for longer period.  

 

2. KERATIN HAIR TREATMENT  ( BRAZILIAN) KERATIN FORTE+

 Useful Tip from our Stylists: To help the treatment better penetrate the hair,  After washing your hair and prior to applying the treatment Spray Hydrogen Peroxide (3% can be obtain at any drugstore)  on the hair and avoid from spraying on the face, or apply color developer volume 10 for 15 minutes on your hair, Rinse, Towel dry  and continue with applying the treatment. This step is not necessary for hair that was already treated before.

Wash hair with clarifying shampoo; this will enable the opening of the cuticles. Rinse well and towel dry. Don’t use conditioner. Wash 2-3 times for better performance, any oils or conditioner left on the hair may affect the treatment performance and penetration

Blow-dry and brush your hair with medium heat until it is completely dry. You will notice its hard to comb and that is normal (it show you the clarifying shampoo was effective)

Comb and separate hair into 3 sections Left Right and Back.

Start applying the treatment product, about 1(one) centimeter from the root and stop half way from the hair shaft, then use a fine comb spreading the product evenly to the tips or your hair verify that the hair is evenly saturated and to remove access product.
Note: It is extremely Important that the entire head is completely covered with the solution and that the solution is evenly distributed throughout the hair before proceeding to the next step. Comb through - using the fine toothed comb - a very little bit should push in front of comb. However the hair should not be over saturated. Excess solution should be combed out of the hair and removed.

Leave solution on the hair for 20 minutes (dont rinse it and continue with the next step)

Blows-dry
 the hair 100% using medium heat. 


Using a flat iron at 400-450°F (it’s about 200-232°C) to straighten the hair in combination with a Heat resistance comb. Starting at the nape, move the iron slowly from scalp to hair ends. Assuring the ends are smooth and straight. Go over the same section several times until there is almost no fumes (it may take 5-12 times depending on kind, condition of hair and part of head) sealing the keratin into the cuticle. Do not overdo since you can burn the hair use your senses it’s very simple. 


AFTER CARE: Wait 3 Days and wash your hair with our Sulfate free shampoo and conditioner. That’s it! Simply enjoy your healthy, shiny straight hair.

MAINTENANCE: Wash hair with: our moisturizing shampoo and conditioner to preserve your healthy and straight hair for longer period.

 

3. KERATIN HAIR TREATMENT  ( BRAZILIAN) GOLD LABEL

Useful Tip from our Stylists: To help the treatment better penetrate the hair,  After washing your hair and prior to applying the treatment Spray Hydrogen Peroxide (3% can be obtain at any drugstore)  on the hair and avoid from spraying on the face, or apply color developer volume 10 for 15 minutes on your hair, Rinse, Towel dry  and continue with applying the treatment. This step is not necessary for hair that was already treated before.

Wash hair with clarifying shampoo; this will enable the opening of the cuticles. Rinse well and towel dry. Don’t use conditioner. Wash 2-3 times for better performance, any oils or conditioner left on the hair may affect the treatment performance and penetration

Blow-dry and brush your hair with medium heat until it is completely dry. You will notice its hard to comb and that is normal (it show you the clarifying shampoo was effective)

Comb and separate hair into 3 sections Left Right and Back.

Start applying the treatment product, about 1(one) centimeter from the root and stop half way from the hair shaft, then use a fine comb spreading the product evenly to the tips or your hair verify that the hair is evenly saturated and to remove access product.
Note: It is extremely Important that the entire head is completely covered with the solution and that the solution is evenly distributed throughout the hair before proceeding to the next step. Comb through - using the fine toothed comb - a very little bit should push in front of comb. However the hair should not be over saturated. Excess solution should be combed out of the hair and removed.

Leave solution on the hair for 20 minutes (dont rinse it and continue with the next step)

Blows-dry
 the hair 100% using medium heat. 


Using a flat iron at 430-450°F (it’s about 220-232°C) to straighten the hair in combination with a Heat resistance comb. Starting at the nape, move the iron slowly from scalp to hair ends. Assuring the ends are smooth and straight. Go over the same section several times until there is almost no fumes (it may take 7-12 times depending on kind, condition of hair and part of head) sealing the keratin into the cuticle. Do not overdo since you can burn the hair use your senses it’s very simple. 


AFTER CARE: Wait 3 Days and wash your hair with our Sulfate free shampoo and conditioner. That’s it! Simply enjoy your healthy, shiny straight hair.

MAINTENANCE: Wash hair with: our moisturizing shampoo and conditioner to preserve your healthy and straight hair for longer period.

 

3. INVERTO TREAT WASH N' GO KERATIN HAIR TREATMENT (FORMALDEHYDE FREE)

 Useful Tip from our Stylists: To help the treatment better penetrate the hair,  After washing your hair and prior to applying the treatment Spray Hydrogen Peroxide (3% can be obtain at any drugstore)  on the hair and avoid from spraying on the face, or apply color developer volume 10 for 15 minutes on your hair, Rinse, Towel dry  and continue with applying the treatment. This step is not necessary for hair that was already treated before.

 1.  Wash hair 2 times with clarifying shampoo; this will enable the opening of the cuticles. Rinse well and blow dry the hair 100% .  (Don’t use conditioner) Important: While drying use a brush or thick comb to detangle the hair, it will make it easy to work with on the next steps.

 2.  Comb and separate hair into 3 sections; Left Right and Back. See instruction video in our site or YouTube

 Start (From the Back Section, this is the most stubborn hair and it needs more time) applying the treatment product, about 0.5 (half) centimeter from the root and all the way down, then use a comb spreading the product evenly to the tips or your hair verify that the hair is evenly saturated and to remove access product. Avoid from applying on the skin/scalp.

 Excess solution should be combed out of the hair and removed.

 When done set the time and Leave solution on the hair for 45 to 60 minutes.  Where 60 min for coarse hair and 45 min for fine hair.

 (don’t rinse it and continue with the next step)


3. Blows-dry the hair 100% using medium heat. And arrange it again into 3 sections,  Tip-while blow drying with a round brush straighten the hair to make it easier for the next step.

 
4. Using a flat iron at 380-390°F  (it’s about 185-200°C) to straighten the hair in combination with a Heat resistance Easy-comb. Starting at the nape, move the iron slowly from scalp to hair ends. Assuring the ends are smooth and straight. Go over the same section several times until there is almost no fumes (it may take 5-9 times depending on kind, condition of hair and part of head) sealing the keratin into the cuticle. Use small strands for better results.  Do not overdo since you can burn the hair.

 
5. Let the hair cool down for 10 minutes or cool it by blowing cold air on it.  Wash hair with sulfate free shampoo and warm water.
Don’t use Clarifying Shampoo.

6. Towel dry and liberally Apply Deep Conditioning Hair Mask.  Wait for 15 min Rinse and blow dry.  That’s it.  You did it.

 
Notice: Colored hair, highlights reds to blondes variation hair may experience change of color (example: red may get brighter, blonde may get yellower) therefore it is recommended to treat your before coloring is due
Maintenance: Use Keratin Research Sulfate Free Shampoo and conditioner to maintain your great looking hair


 *Notice: Work in well ventilated area and avoid breathing the fumes.
 Colored hair, highlights reds to blondes variation may experience change of color (example: red may get brighter, blonde may get yellower)

 

*Please note there are few changes to the process, please read it through before proceeding with the treatment.

**Before you start: you will need the following: Cape, bowl, brush, blow drier, flat iron, large hair clips, 2-3 fine tooth combs (very important to spread the product you need different sizes to match to the hair thickness) Easy comb or heat resistance comb.
***Work in well ventilated area and avoid breathing the fumes.

 

 

There are no products matching the selection.